New type of pneumatic hot cap machine
Through this machine, you can bake any color, color, photo, landscape and personalized pattern on the hat. It is suitable for advertising, gifts, publicity, personalized items and other industries.
[main performance parameters]
Model: GS-QD815
Voltage: 220V 110V
Time control range: 0-999SEC
Rated power: 550W
Temperature control range: 0-399 degrees centigrade
Work size: 8*14 CM
Shape size: 66*69*32CM
Whole machine weight: 22KG
[the features of this machine]
1. digital temperature and time dual display, more user-friendly design, operation more convenient and quick;
The microcomputer controls the constant temperature time;
2. the pressure adjustment is convenient.
3. equipped with platinum thermal resistor, the temperature error is + 3 C.
4. appearance is fashionable and beautiful, and it is convenient to carry.
[operation steps]
1, 1, connect the compressor connector, open the air pressure, adjust the pressure regulator 4 to (4pB-6pB), make the heating plate rise.
2, connect the compressor connector, open the barometric pressure, modulate the pressure gauge (4pB-6pB), and raise the heating plate.
3, power up, turn on the main switch, and the indicator will light up.
4, adjust the time and temperature required.
5, after adjusting the temperature and time, wait for the machine to heat up.
6. After the temperature is heated to the specified temperature, the hat is flat on the silica gel pad, the articles are pressed flat, put into the hot drawing paper, then put on the high temperature cloth, press the start switch, the stamping start, the time reversal.
8, at the end, the buzzer rings. The heating plate is automatically raised and pulled out of the working table.
9. The perm. If the hot tear paper is cold, please wait 5-10 seconds to tear up the hot paper. If it is the hot tear hot paper, if the hot stamping is finished, please tear the ironing paper immediately.
Be careful:
The whole machine must have a suitable ground to protect the ground
The successful hot stamping needs the correct time, the coordination of temperature and pressure, the thickness of the material and the various kinds of blanching paper affect the effect of stamping. All kinds of scald paper need to be burned in small samples for mass production.