Products and uses:
The equipment can burn the color patterns of sublimation and solvent inks on the fabrics of cotton, hemp and chemical fiber through hot transfer printing. It can also make large surface foaming and flocking scald, hot bead hot drilled and so on. It can also roast color color marks, portrait photos and landscape patterns on porcelain and metal plates, especially for the production of medals, commemorative cards, cultural shirts and personality T-shirts, etc. Its characteristics: Economic and practical, beautifully patterned. It is replacing traditional embroidery and screen printing, and its cost and effectiveness are much lower than that of general embroidery and multicolor screen printing.
The heating plate adopts special ultra precision line technology, which can effectively guarantee the balance and stabilization of the temperature. The all digital temperature and time display, the temperature error is + 2 degrees.
technical parameter
|
Specifications
(cm)
|
Voltage
（V）
|
Power
(KW)
|
time frame
(Sec)
|
temperature range
(℃)
|
|
60*80
|
110/220
|
4.5
|
0-999
|
0-399
|
|
60*120
|
110/220
|
5.5
|
0-999
|
0-399
|
|
80*100
|
110/220
|
5.5
|
0-999
|
0-399
|
Step 1: insert the power line.
Step two: open the power switch.
Step three: adjust the time and temperature required. (for details see the final)
Step four: after adjusting the thermometer and schedule, wait for the machine to heat up.
Step five: after the temperature is up, the thermometer will turn on the green light. At this time, you can take out the items to be printed.
Step six: put the printed articles on the silicone pad.
Step seven: after the item is steady, press the handle. Flatten the clothes, put the transfer paper and put the high temperature cloth on, then press it to start.
Step eight: hot stamping, the buzzer ringing.
Step nine: take out the ironed items. If the hot tear paper is cold, please wait 10-15 seconds to tear up the hot paper. If it is the hot tear hot paper, if the hot stamping is finished, please tear the ironing paper immediately.
Pressure: if the pressure is not enough or too large, the pressure regulating knob of the five corners can be increased to the clockwise direction after the adjustment, and on the contrary, it will reduce the pressure.
Time: when the hot stamping time arrives and the buzzer does not sound or ring, the contact point of the micro switch in the tail box must be checked if the distance is moderate. If it is not moderate, it must be adjusted to the appropriate position.
Temperature: when the temperature is reached, the pointer of the controller's accuser is in the "0" position (about 15 minutes to 180 degrees), and if the heating board is not heated for several minutes, check the circuit.
Be careful:
The whole machine must have a suitable ground to protect the ground
The successful hot stamping needs the correct time, temperature and pressure, the thickness of the clothes and the material and the various kinds of drawing paper affect the effect of stamping. All kinds of scald paper should be tried to burn the sample, so it can be produced in mass.
Cotton clothes: 180-220 degrees, 15-25 seconds
Polyester clothing: 180 degrees, 15 seconds
Pearlite: 180 degrees, 120--180 seconds
Metal pendant: 180 degrees, 60 seconds
Mouse pad: 180 degrees, 15 seconds
Porcelain: 200 degrees, 180 seconds
Key button: 180 degrees, 100 seconds
Ceramics: 180-220 degrees, 180 seconds
Setting the temperature: set the key once by SET, at this time the number appears 5P, the number of the lower row flashes, then the temperature setting is set, the temperature setting is set according to the key minus key, and then the SET key is set after setting up for 2 seconds.
Setting the time: set the key two times according to SET, at this time the number appears 5E, the lower number flashes, then the temperature setting state, the temperature setting is set according to the key minus key, and then the SET key is set for 2 seconds.
Purchase notice
1. The originals of the manufacturer
The machines sold in our factory are all new machines, which do not recycle or sell second-hand machines. If you need any second-hand low-cost machine, please contact other companies.
2. On machine stocking period
Because the machine type, voltage and color are quite numerous. The stock is also changing every day. Please confirm the inventory or production time with us before placing the order.
3. On the color of the machine
The conventional color of the machine is blue, red, and white. If you want other colors, you can customize it.
4. On the time of online service and visit to the factory
Every Monday to Saturday (except for legal holidays), at 8 a. m. at ~12 a.m. and at 1:30 p.m. at ~5:30., the customers who need to visit the factory please confirm with us in advance so as not to run in a white run.
5. About after sale
All the machines purchased directly from our factory have a one year warranty. In the warranty period, because of machine failure caused by machine quality, only the fault picture or video is provided to our technicians to judge what parts are bad and the bad accessories can be sent back free of charge. Over the warranty period, or due to logistics, human factors, and other non - quality problems caused by the failure, we will charge a small amount of maintenance and spare parts cost.
6. On delivery
Because the weight and size of different types of machines are quite different. All our quotations are free from tax. After the machine is ready, the customer can choose express or logistics by himself or at least 1 days notice to arrange shipment for us.
Contact information：
QQ:762806896
Ali Wangwang: noble machinery 1688
Phone: +86 (0) 76986866158
Fax: +86 (0) 76985623986
Cell phone: 18575381952
Address: Tea Road Guangdong city of Dongguan Province
Six. Maintenance items:
The temperature and time required for stamping are as follows:
Five. Operation steps
