Manual high pressure machine
It can burn the color patterns of sublimation and solvent inks on the fabrics of cotton, hemp and chemical fiber through heat transfer and heat transfer. It also can be used in the process of heat treatment, such as foam and flax, hot bead, hot bead and so on. It can also roast color color marks, portrait photos and landscape patterns on porcelain and metal plates. It is especially suitable for the production of medals, commemorative cards, cultural shirts, personality T-shirts and so on. Practical and beautifully patterned. It is replacing traditional embroidery and screen printing, and its cost and effectiveness are much lower than that of general embroidery and multicolor screen printing.
Technical parameters:
[device name]: a new type of high voltage machine
[device model]: GS-SD3802
[temperature range]: 0-399 degrees centigrade
[time control]: 0-999sec
[voltage]: 110V/220V
[power]: 280030003500 (W)
[weight]: 2935 40KG
[stamping size]: 38*38 40*50 40*60 (CM)
[package size]: 73*48*43.5cm 75*65*42cm 81*71*44.5cm.
Product advantages:
The heating plate adopts special ultra precision line technology, which can effectively guarantee the balance and stabilization of the temperature.
All digital temperature and time display, temperature error (+ 2 c).
The screw pressure design can adjust the working pressure at any time.
According to lever principle, it has beautiful appearance and Japanese style.
Reminder:
1, pressure: if the pressure is not enough or too large, it can adjust the pressure screw rod, increase pressure in the direction of clock, reverse clock to reduce pressure.
2, time: when the hot stamping time arrives and the buzzer does not sound or stop, it is necessary to check whether the contact point of the micro switch in the tail box is moderate, and if it is not suitable, it must be adjusted to the appropriate position.
3, temperature: preheating about 15 minutes, when the temperature reaches set temperature, the heating indicator lights out, can start stamping; if the heating board is not hot for several minutes, please check the line.
4, when the handle goes down to the bottom, the hand opens and the handle goes back automatically. Please adjust the adjustment nut on the heating board. When the stamping is finished, the handle can adjust the screw upward.
<script type="text/javascript"> productLoad(); $('.soleft li>a').hover(function () { $(this).addClass('move') $(this).css("color", "#fff"); $(this).stop().animate({ "left": "20" }, 500) }, function () { $(this).removeClass('move') $(this).css("color", "#666"); $(this).stop().animate({ "left": "0" }, 500) }) if (SID.indexOf("0001,0006") > -1) { $(".nav li").removeClass("cur"); $(".nav li").eq(1).addClass("cur"); } else if (SID.indexOf("0001,0007") > -1) { $(".nav li").removeClass("cur"); $(".nav li").eq(2).addClass("cur"); } else if (SID.indexOf("0001,0008") > -1) { $(".nav li").removeClass("cur"); $(".nav li").eq(3).addClass("cur"); }</script>